 |
Drive Medical Adhesive Pre-Gelled Electrodes from Incontinence Products Plus are reusable self-adhering pre-gelled electrodes for TENS units. They are reusable and self-adhering electrodes that are designed for multiple use for up-to 14 days. They provide uniform current dispersion for maximum effectiveness. Drive electrodes are flexible, conformable and low profile.
Application of Re-Usable Self Adhesive Electrodes
Application: - Clean & dry the skin at the prescribed area thoroughly with soap & water prior to the application of electrodes
- Insert the lead wire ingot he pin connector on the pre-wired electrodes
- Remove the electrode from the protective liner and apply the electrodes firmly to the treatment site
Removal: - Left at the edge of electrodes and peel. Do not peel on the lead wires because it may damage the electrodes
- Place the electrodes on the liner and remove the lead wire by twisting and pulling at the same time
Care & Storage: - Between uses, store the electrodes in the resealable bag in a dry cool place
- It may be helpful to improve repeated application by spreading a few drops of cold water over the adhesive and durn the surface up to air dry. Over saturation with water will reduce the adhesive properties
Important: - Do not apply to broken skin
- The electrodes should be discarded when they are no longer adhering
- The electrodes are intended for single patient use only
- If irritation occurs, discontinue use and consult your clinician
- Should skin rash occur, discontinue use and contact your physician
- Do not stimulate while driving a motorized vehicle or operating machinery
- Do not exceed 0.1 watts/cm2
- Read the instructions for use of self adhesive electrodes before application
| Size | | Shape | | Drive Medical Product Code | | 1-3/4" x 1-3/4" | | Square | | AGF-101 | | 2" x 4-1/4" | | Rectangle | | AGF-103 |
Drive Medical Part Number: AGF-101, AGF-103
|
|
|
Great price and quick shipping 
